ITRS Opsview Cloud Documentation

Passive Checks

What are Passive Checks? Copied

Passive Checks are designed to allow in-bound data from your applications or from or other Monitoring tools.

To support software such as NSCA (Nagios Service Check Acceptor), please go to Results Forwarder. Passive checks can be also submitted via REST API.

Passive checks are an empty Service Check. Opsview Monitor creates the Service Check, but we expect results to be pushed into the system from some external source.

As an aside, in a distributed environment, Opsview Monitor actually creates passive services for all Hosts that are monitored by a collector and then uses these results to update the master’s passive services.

Users can specify a passive Service Check to get its results from an active check. It is up to the plugin run by the active Service Check to return information into this particular passive Service Check.

For example, the Interface, Errors and Discards Service Checks will be defined as passive checks, where the results will be provided by the Interface Polling Service Check which runs the check_snmp_interfaces_cascade plugin.

If this field is set, then when a service is rechecked, the correct active service will be run.

Configuring a new Passive Check Copied

To configure a new passive check, navigate to the Configuration > Service Checks menu.

Once within the Service Checks window, click on the ‘Add New’ button in the top level and then click on ‘Passive Checks’:


The displayed window is split into two tabs:

Details Tab: Basic Copied

Basic tab settings

The Details tab is split into two drawers, ‘Basic’ and ‘Advanced’. The items within Basic are the most commonly used fields for Service Check configuration:

Name Copied

The name of the Service Check, i.e. ‘Cisco 3750 Stack configuration status’.

Description Copied

A friendly description of the Service Check, i.e. ‘A custom SNMP check that returns the status of the Switch in the context of its stack configuration. Apply this to all stacked Cisco 3750’s.’

Service group Copied

Covered in Section, Service Group is a container for one or more Service Checks and are used for alerting and access control, amongst others.

Host templates Copied

Covered in Section, a Host Templates can contain one or more Service Checks from any Service Group. While a Service Check can only ever belong to one Service Group, it can belong to as many Host templates as you desire.

Details Tab: Advanced Copied

The Advanced tab provides with more Service Check options:

Advanced tab settings

Hashtags Copied

The hashtags which this Service Check will belong to, when applied to one or more Hosts.

Globally applied hashtags Copied

If the Service Check has been added to a Hashtag via the ‘Configuration > Hashtags’ section instead of the selection box above, then the Hashtags will be listed here. To remove the Service Check from the Hashtag listed here, you should edit the Hashtag within ‘Configuration > Hashtags’.

Dependencies Copied

Dependencies allow you to set a parent/child relationship for the Service Check, i.e. for this SNMP polling check, we may choose to have a parent Service Check of ‘TCP Port 161’. This means that if the Service Check ‘TCP Port 161’ changes to a CRITICAL state (i.e. SNMP is down), then this Service Check and all other Service Checks that are a child of the aforementioned Service Check will change to an UNKNOWN state and will not resume their normal running until after the parent Service Check returns to an ‘OK’ state.

Notify for service on Copied

This section determines which states the Service Check should notify on, i.e. only on ‘CRITICAL’ or ‘UNKNOWN’, for example. **Note: **If a Host does not notify on any states, then the Service Checks on that Host will also not send any Notifications.

Notification period Copied

This field uses the ‘Time Periods’ already defined within the Opsview Monitor system, and determines when Notifications are allowed to be sent to Users.

Create Multiple Service Checks Copied

If a Variable is selected within this drop-down, for each Variable of the selected type added a new Service Check will be added with the value in the Variable added to the Service Check name. I.e. if we have ‘Disk Capacity’ as a Service Check with ‘%DISK%’ selected in the ‘Create Multiple Services: drop-down’, then if four Variables are added via the ‘Variables’ tab ’ 4 Service Checks will be added ‘Disk Capacity: Value1, Disk Capacity: Value2’, and so forth.

Flap Detection Copied

A service is considered flapping if its state changes too much. If this option is set, any services will be checked for this flapping condition and an icon will appear for the service and notifications will be temporarily disabled until the service comes out of a flapping state. We recommend that flap detection is enabled for active checks. However if you find a service is flapping frequently, there is probably another issue that needs investigating. We recommend that flap detection is disabled for passive checks.

Sensitive arguments Copied

If the Service Check is a plugin-based one, then the Sensitive Arguments checkbox allow you to determine if the arguments for the service check are displayed within the ‘Test Service Check’ tab within the investigate mode. If the flag is checked, the arguments will be hidden ’ if unchecked the arguments will be shown. If you have TESTCHANGE set within your Role, you will be able to modify the arguments before testing the Service Check.

Record Output Changes Copied

Normally, the output of a Service Check is only recorded when the state of that service changes. For example, assuming a new check has been set up:

State Output Output Recorded
OK Service OK: 10% Yes
OK Service OK: 15% No
OK Service OK: 15% No
OK Service OK: 20% No
CRITICAL Service warning: 80% Yes
CRITICAL Service warning: 75% No
WARNING Service warning: 70% Yes
WARNING Service warning: 40% No
WARNING Service warning: 40% No
OK Service OK: 20% Yes
OK Service OK: 18% No

This option instead causes every change of output to be logged regardless of change of state (for the selected state changes). For example, for the same sequence above with OK and WARNING selected:

State Output Output Recorded
OK Service OK: 10% Yes
OK Service OK: 15% Yes
OK Service OK: 15% No
OK Service OK: 20% Yes
CRITICAL Service warning: 80% Yes
CRITICAL Service warning: 75% NO - CRITICAL option was not selected
WARNING Service warning: 70% Yes
WARNING Service warning: 40% Yes
WARNING Service warning: 40% No
OK Service OK: 20% Yes
OK Service OK: 18% Yes

Alert every failure Copied

This option forces a Notification to be sent on every check in a non-OK state. This is useful if you have a passive Service Check which receives results. There are three states for this option:


The Notification number will increase for every non-OK result and only gets reset to zero when an OK state is received.

Event handler Copied

Covered in greater detail in the ‘Event handler’ section of the User Guide, Event Handlers are scripts that can be triggered when a Service Check goes into or recovers from a problem state, such as ‘WARNING’ or ‘CRITICAL’. The script can do anything you like, but a common usage includes restarting a service or server (virtual machine, for example) via an API.

Check Freshness Copied

If you are receiving passive results, you may want to check that you are getting results within a certain timeframe. From Opsview Monitor 6.0.0, you can configure this to take an action. You can enable freshness checking which means that if this service has not been updated for this amount of time, then an artificial result can be inserted into the system. Freshness checking will only occur within the Time Period on the host that this service check belongs to.

Timeout Copied

This is the amount of time before Opsview Monitor considers a service to be not fresh. You can enter this value in a duration format, such as 10m for 10 minutes or 48h 15m for 48 hours and 15 minutes.

Status Copied

Choose the appropriate state that you want the service to change to when it passes the freshness threshold. You may want to automatically set a service back to OK after one hour for certain types of checks.**

Text Copied

Choose what text you want to set as the output. The text will be added to the end of the state phrase (OK, WARNING, CRITICAL, UNKNOWN).

Passive Checks Tab Copied

Once you have configured the relevant options within the ‘Details’ tab, you can click on the ‘Passive Checks’: tab:

Passive checks tab

This window contains just one option:

Cascaded From Copied

Designates an active check that is responsible for submitting passive results into your new passive Service Check. This ensures that when a recheck is performed, the correct active check runs for your passive check.

Once the passive check and its options have been configured, it can be applied to one or more Hosts. See ‘Section Service Checks Tab’ for guides on how to add the newly created Service Check to a Host.

Submitting Results to Passive Checks Copied

Results for passive checks can be submitted in one of two ways:

["Opsview On-premises"] ["User Guide"]

Was this topic helpful?