×
![]()
Withdraw of the 6.9.2 Release
Unfortunately, due to critical issues identified with version 6.9.2, we have decided to remove it and ensure it's no longer available for download. These issues impacted the ability to install or upgrade but none were security-related. We are diligently working to resolve these issues and are planning to release an updated version 6.9.3 in early May.
What if you've already upgraded?For customers who have already upgraded to 6.9.2, no immediate action is required, as none of these issues are security-related. Once it's available, you will still be able to upgrade to 6.9.3 as normal. We appreciate your patience and trust as we continue to enhance our software to better serve you. Thank you for your understanding.
Queryhost - Listing
GET request Copied
This can be used to query interfaces against an existing Opsview Host only. The query is always run from the Monitoring Cluster that is monitoring the Host.
The required parameters are one of the following:
hostname— name of the host in Opsview.hostid— ID of the host taken from theidcolumn in theopsview_hoststable in theruntimedatabase.
Note
Ensure that IDs are sourced from the correct database and table as they can differ for the same Opsview Host.
POST request Copied
This can be used to query interfaces against existing Opsview Hosts and devices that are not currently monitored by Opsview. It allows you to specify a Monitoring Cluster for the query and test device connectivity.
Existing Opsview Host Copied
The required parameters are:
snmp_version— any of 1, 2c, or 3.hostid— ID of the host taken from theidcolumn in thehoststable in theopsviewdatabase.
Note
Ensure that IDs are sourced from the correct database and table as they can differ for the same Opsview Host.
Depending on the SNMP version, additional required parameters are:
Version 1 and 2c Copied
snmp_community— SNMP community string.
Version 3 Copied
snmpv3_username— SNMPv3 username.snmpv3_authpassword— SNMPv3 authentication password.snmpv3_authprotocol— SNMPv3 authentication protocol. Can be any ofmd5,sha.snmpv3_privpassword— SNMPv3 privacy password.snmpv3_privprotocol— SNMPv3 privacy protocol. Can be any ofdes,aes,aes128,aes256,aes256c.
Warning
When setting thesnmpv3_privprotocolparameter, theaes256andaes256coptions are only fully supported on some operating systems. For more information, see SNMP Privacy Protocol Support.
For any SNMP version, optional parameters are:
testconnection— 0 to run a full interface query. 1 to just test the connection and return the system description. This defaults to 0.msid- ID of the Monitoring Cluster that the query is to be run from. 1 is the Master Monitoring Server (orchestrator). This does not have to match the Monitoring Cluster currently monitoring the existing Host, but that is used as the default.snmp_port— port to connect to on the SNMP device. This defaults to 161.snmp_max_msg_size— max SNMP message size in bytes. This is unset by default. See SNMP Message Size.snmp_use_getnext— 1 to use SNMP GetNext instead of SNMP GetBulk to query; 0 to use SNMP GetBulk. This defaults to 0. See Use SNMP GetNext.snmp_use_ifname— 1 to base interface names onifNameinstead ofifDescr; 0 to useifDescr. This defaults to 0. See Use SNMP ifName.tidy_ifdescr_level—ifDescrmodification level such as 3. This defaults to turned off. See Modify ifDescr Level.
Unmonitored device Copied
Required parameters are:
snmp_version— any of 1, 2c, or 3.ip— FQDN or IP address of device.msid- ID of the Monitoring Cluster that the query is to be run from. 1 is the Master Monitoring Server (orchestrator).
Depending on the SNMP version, additional required parameters are:
Version 1 and 2c Copied
snmp_community— SNMP community string.
Version 3 Copied
snmpv3_username— SNMPv3 username.snmpv3_authpassword— SNMPv3 authentication password.snmpv3_authprotocol— SNMPv3 authentication protocol. Can be any ofmd5,sha.snmpv3_privpassword— SNMPv3 privacy password.snmpv3_privprotocol— SNMPv3 privacy protocol. Can be any ofdes,aes,aes128,aes256,aes256c.
Warning
When setting thesnmpv3_privprotocolparameter, theaes256andaes256coptions are only fully supported on some operating systems. For more information, see SNMP Privacy Protocol Support.
For any SNMP version, optional parameters are:
testconnection— 0 to run a full interface query. 1 to just test the connection and return the system description. This defaults to 0.snmp_port— port to connect to on the SNMP device. This defaults to 161.snmp_max_msg_size— max SNMP message size in bytes. This is unset by default. See SNMP Message Size.snmp_use_getnext— 1 to use SNMP GetNext instead of SNMP GetBulk to query; 0 to use SNMP GetBulk. This defaults to 0. See Use SNMP GetNext.snmp_use_ifname— 1 to base interface names onifNameinstead ofifDescr; 0 to useifDescr. This defaults to 0. See Use SNMP ifName.tidy_ifdescr_level—ifDescrmodification level such as 3. This defaults to turned off. See Modify ifDescr Level.
Listing interfaces Copied
Output of a list response:
{
interfaces => [
{
discards_critical => 15,
discards_warning => "",
errors_critical => 10,
errors_warning => "",
extra_info => "alias:'' speed:'' link:'' status:''",
id => 0,
ifAlias => undef,
ifDescr => "",
ifLink => undef,
ifSpeed => undef,
ifStatus => undef,
interfacename => "",
throughput_critical => "0:50%",
throughput_warning => "",
},
{
discards_critical => "",
discards_warning => "",
errors_critical => "",
errors_warning => "",
extra_info => "alias:'192.168.13.0 network' speed:'10Mbit/s' link:'up' status:'up'",
id => 1,
ifAlias => "192.168.13.0 network",
ifDescr => "Ethernet0/0",
ifLink => "up",
ifSpeed => "10Mbit/s",
ifStatus => "up",
interfacename => "Ethernet0/0",
throughput_critical => "",
throughput_warning => "",
},
{
discards_critical => "",
discards_warning => "",
errors_critical => "",
errors_warning => "",
extra_info => "alias:'192.168.21.0 network' speed:'10Mbit/s' link:'down' status:'down'",
id => 3,
ifAlias => "192.168.21.0 network",
ifDescr => "Ethernet0/1",
ifLink => "down",
ifSpeed => "10Mbit/s",
ifStatus => "down",
interfacename => "Ethernet0/1",
throughput_critical => "",
throughput_warning => "",
},
{
discards_critical => "",
discards_warning => "",
errors_critical => "",
errors_warning => "",
extra_info => "alias:'' speed:'8Gbit/s' link:'up' status:'up'",
id => 5,
ifAlias => "",
ifDescr => "Loopback0",
ifLink => "up",
ifSpeed => "8Gbit/s",
ifStatus => "up",
interfacename => "Loopback0",
throughput_critical => "",
throughput_warning => "",
},
{
discards_critical => "",
discards_warning => "",
errors_critical => "",
errors_warning => "",
extra_info => "alias:'' speed:'10Gbit/s' link:'up' status:'up'",
id => 4,
ifAlias => "",
ifDescr => "Null0",
ifLink => "up",
ifSpeed => "10Gbit/s",
ifStatus => "up",
interfacename => "Null0",
throughput_critical => "",
throughput_warning => "",
},
{
discards_critical => "",
discards_warning => "",
errors_critical => "",
errors_warning => "",
extra_info => "alias:'192.168.250.0 network' speed:'2Mbit/s' link:'up' status:'down'",
id => 2,
ifAlias => "192.168.250.0 network",
ifDescr => "Serial0/0",
ifLink => "up",
ifSpeed => "2Mbit/s",
ifStatus => "down",
interfacename => "Serial0/0",
throughput_critical => "",
throughput_warning => "",
},
{
discards_critical => "",
discards_warning => "",
errors_critical => "",
errors_warning => "",
extra_info => "alias:'' speed:'100Mbit/s' link:'up' status:'up'",
id => 7,
ifAlias => "",
ifDescr => "Virtual-Access1",
ifLink => "up",
ifSpeed => "100Mbit/s",
ifStatus => "up",
interfacename => "Virtual-Access1",
throughput_critical => "",
throughput_warning => "",
},
{
discards_critical => "",
discards_warning => "",
errors_critical => "",
errors_warning => "",
extra_info => "alias:'' speed:'100Mbit/s' link:'up' status:'down'",
id => 8,
ifAlias => "",
ifDescr => "Virtual-Access2",
ifLink => "up",
ifSpeed => "100Mbit/s",
ifStatus => "down",
interfacename => "Virtual-Access2",
throughput_critical => "",
throughput_warning => "",
},
{
discards_critical => "",
discards_warning => "",
errors_critical => "",
errors_warning => "",
extra_info => "alias:'' speed:'100Mbit/s' link:'up' status:'down'",
id => 6,
ifAlias => "",
ifDescr => "Virtual-Template1",
ifLink => "up",
ifSpeed => "100Mbit/s",
ifStatus => "down",
interfacename => "Virtual-Template1",
throughput_critical => "",
throughput_warning => "",
},
],
system_description => "Cisco Internetwork Operating System Software",
}
Note
Theid => 0interface is used to return the default thresholds for all interfaces; it is not a real interface.
Testing connection output example Copied
{
system_description => "Cisco Internetwork Operating System Software",
}
["Opsview On-Premises"]
["API", "Technical Reference"]